| |
 |
| |
 • S/S Tie Wire
• No. 10 Cloth
• S/S Toggle clips
• Rewettable Cloth
• Cladding Metals
• S/S Expansion Springs
• Assorted Aluminium Tapes
• Mastics, Sealants and Silicon
• All Industrial Insulation Products
• Calcium Silicate Powder Cement
• Fibreglass Tapes and Lagging Rope
• S/S Self Tapping and Needle Point Screws
• S/S Banding and Clips (12mm and 19mm)
|
• Fibreglass, Bio-Soluble & Ceramic Square Braid & Round Braid Ropes Soft & Hard
• Gland Packing, Spiral Wound, Special Gaskets & Sealing Materials
• Fibreglass Tadpole Tape 
• High Temperature Sewing Thread
• Stainless Steel Mesh
• High Temperature Silicone
• Turbo Covers
• B-7 Bolts
• Fibreglass Lagging Rope
• Fibreglass and Ceramic Fibre Plain Tape
• Fibreglass and Ceramic Fibre Ladder Tape
• Calcium Silicate Boards & Custom machining
• High Temperature Door Seals and Gaskets |
|
| |
| |
 |
| |
| |
Bellis Blanket is made from high temperature insulation glass fibres and has a classification temperature of 1100°C.
Bellis Blanket is made from long Fibres. It is needled from both sides and does not contain any lubricant or binder. It has an excellent tensile strength prior to and after heating and does not emit any fume or smell. The thermal stability of fibres has excellent strength and flexibility prior to and after heating make the Bellis Blanket fibres ideal for a wide variety of industrial and building applications |
 |
|
| |
| |
 Download Product Information |
| |
| |
| |
 |
| EPA REGISTERED ~ READY-TO-USE ~ Bactericidal and Fungicidal |
| |
| |
 |
Foster ® 40-80TM Disinfectant is a convenient, ready-to-use
formulation that is effective against a broad spectrum of
bacteria used to disinfect washable, non-porous, hard
surfaces found in homes, schools, restaurants, hospitals
and other institutional and industrial facilities, such as
food processing plants.
Foster 40-80 Disinfectant is also EPA registered to be
effective against odor-causing bacteria and fungi when
used in water damage restoration situations on porous
and semi-porous surfaces. |
|
|
| |
| Formulated for Residential, Commercial, Institutional and Industrial Use |
| |
| Download Product Information | CLICK HERE to see Foster Thermal Insulation Products |
| Click Here to Download Foster Product Guide |
| |
| |
| |
 |
| |
| |
| |
Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion specifically formulated for long-term fungicidal activity, with no loss of activity on aging. It is formulated to effectively prevent the spread of molds and odor causing bacteria on its surface. It provides a tough, elastic, decorative finish that allows for movement without splitting to create lodging places for bacteria. |
 |
|
|
| |
| |
| Download Product Information | CLICK HERE to see Foster Thermal Insulation Products |
| Click Here to Download Foster Product Guide |
| |
| |
| |
 |
| |
| |
MONOLITHIC ISOLATING JOINTS
Monolithic Isolating Joints are used to provide electrical sectioning and passive protection against corrosion on inlet and outlet pipes of meters, tanks, pumping station, etc. The Monolithic Isolating Joints improve the cathodic protection of gas, water and petroleum pipelines with important savings in operation and maintenance costs.
The Cathodically protected structures / surfaces, are isolated from the unprotected structures by installing Monolithic Joints. Monolithic Insulation Joints are superior to Insulation Kit Gasket assemblies. The joints are pre-assembled at the factory and welded to the pipelines at site.
These joints are used as a part of the installations of Crude Oil underwater pipelines, LPG bullets, off-shore drilling pipelines & cross country pipelines, these units range from 2” to 42” and pressure rating from 150lb to 1500lb.
|
| Technical: |
| Insulation resistance: |
>25 mega Ohms @ 1000V DC |
| Dielectric strength: |
> 5kV for one minute |
|
|
|
THREADED RODS
 Threaded rods and nuts are machined from a special quality of epoxy glass laminate. They offer excellent resistance to humidity, sea water corrosion and chemical agents. The fastenings are well adapted for use in oil and in other dielectric liquids and operate at both very low and high temperatures (up to 180°C). In addition, they display high dielectric strength and very good tracking resistance. Rods are mainly used for the manufacture of cylinders and rollers. |
|
|
| |
| |
| |
INSTA-LAG® - TIPS® - TANK® - Vessel Insulation Systems |
| |
 |
KAEFER Insta-Lag® is Revolutionary Design which provides the end user with an Innovative, Safe and Effective Method of Pipe Insulation.
Bellis Australia Manufactures Insta- Lag® under licence to Kaefer Integrated Services Pty Ltd.
Download More Information - TIPS® |
 |
 |
|
| |
| |
| |
